Search Results for: stammholz entsorgen nähe mönchengladbach
-
Lifting Clamps Scissor Grab
3rd March, 2017 | by excitemediaOur versatile Scissor Grab Lifting Clamps are used for a wide variety of lifting applications. Suspend from an overhead hoist and the gripping jaws engage the product from the sides. The heavier the load, the more gripping force is applied. A simple mechanism releases and closes the jaws for each lift cycle.
There are two styles of grippers to lift flat items, like cartons, or round grippers for products like cylinders. The lifting gap ranges shown below for the flat type show the largest gripping range. View the PDF below for all the other gripping ranges available.
Maximum load capacity of 125kg. See PDF specification sheet for more details.
-
Pallet Return & Stack Devices
3rd March, 2017 | by excitemediaAvoid injury risks anywhere in your facility. Pallet Return Devices will assist production workers with the hard labour task of stacking empty wooden or plastic pallets without using an outside energy source such as electricity or compressed air. They are the perfect pallet return solution that many operations, specifically distribution centres, general warehousing facilities, manufacturing facilities, food and beverage plants, and retail stores, can benefit from. It works to increase the safety of your facility by reducing the risks of handling pallets with a lifting method that reduces musculoskeletal disorders. The units also reduce the risks of falling pallets because a ‘perfect’ stack is less prone to tipping over and causing a potentially serious injury. A neat stack also reduces labour costs as labourers no longer have to struggle to make an acceptable stack and fork truck drivers avoid reshaping a stack of pallets when ready to be handled again. An optional flashing strobe alerts forklift driver a full stack is ready for pickup.
Pallet Return Devices are available in two configurations: Stand Alone Floor Configuration & Pick module.
Stand Alone Floor Configuration can be mounted in any facility with a flat surface so the benefits experienced in a pick module can also be experienced in all other areas of a facility. Anywhere that pallets are stacked, the stand alone floor model can be there to assist!
Pick Module Configuration mounts to existing pallet flow rails and can be retrofitted to fit any existing pallet racking.
-
Conveyor – Vertical Prorunner
3rd March, 2017 | by excitemediaProrunner, product elevators, are modular design, for quick, easy installation, modification and they are multifunctional, so they are versatile to combine for different tasks. Their durability ensures they require little maintenance and have a high degree of operational availability. There are 4 versions of Prorunner product elevators, they are:
MK1 is a discontinuous, reciprocating product elevator that is robust and has minimal maintenance.
Infeed Height: 500 mm (minimum 300 mm)
Outfeed Height: 2,500 mm (up to 11 metres)
Capacity: up to 300 p/hour
Product weight max. 50 kg per carrier
Click here for videoMK5 is a continuous product lifter with a surprisingly low price tag for a continuous conveyor.
Infeed Height: 750 mm – min. 525 mm
Outfeed Height: 2500 mm – (max. approx. 20metres)
Capacity: up to 450 p/hour
Product weight max. 50 kg per carrier
Click here for videoMK9 is a rugged, reciprocating pallet lift that will lift and lower pallets, until the end of time.
Infeed Height: 750mm
Outfeed Height: 2500mm
Capacity: 20 to 60 p/hour
Product: 1200 x 1200mm LxW
Weight: 500 to 1000kg
Click here for videoMK10 is a rugged, reciprocating pallet lift that will lift and lower pallets and that it does, so easily.
Infeed Height: 750mm
Outfeed Height: 2500 to 10000mm
Capacity: 20 to 60 p/hour
Product: 1200 x 1200 LxW
Weight capacity: 500 to 2000kg
Click here for video -
IBC Spill Bin and Tilting Stand
3rd March, 2017 | by excitemediaThe IBC Spill Bin Tilter effortlessly and safely removes liquid from Intermediate Bulk Containers (IBC). Providing spill containment of up to 1250 litres, the device also offers environmental protection against chemical spills. Designed to suit storage and containers of most IBC’s on the market, it provides a spill capacity of at least 125% of the holding capacity for ‘portable’ units. It has been constructed in accordance with relevant Australian Standards.
As the liquid is dispensed within the spill bin, the spring mechanism raises the rear of the IBC to an incline of up to 10 degrees, allowing for a full discharge of contents. This is a safer, easier and more effective means for IBC decanting. Fork pockets are fitted to both the spill bin and tilter for ease in transport, together or separately.
-
Pallet Drawer – Easi Picker
3rd March, 2017 | by excitemediaThe onus on employers in Australia, is to keep workplaces safe. During manual handling tasks it is preferable to provide devices and practices that lessen or delete hazards and risks for the prevention of muscular skeletal disorders. The Easi Picker is one of those devices designed to radically increase safety and efficiency. They are available with our without turntables to suit standard CHEP size pallets or optionally for Euro size pallets.
-
Stair Climber Trolley CargoMaster BC400
3rd March, 2017 | by excitemediaTransport up to 400 kg single-handedly with our CargoMaster BC400. This powerful unit makes heavier loads even more possible when moving up and down stairs. Its state-of-the-art lifting mechanism accommodates almost every manual handling application.
The CargoMaster BC400 unit is robust and unique. It features an electrically adjustable loading fork that safely moves heavy products to your desired destination. Furthermore, its integrated lift function makes it extremely easy to load/unload shelves and vehicles.
This device can travel anywhere between 10-15 floors with one battery charge. If required further, the battery can easily be swapped for another spare and can even be charged from a vehicle.
-
Forklift Jibs – Fixed Angle
3rd March, 2017 | by excitemediaThese three models of FIXED INCLINE TELESCOPIC EXTENSION JIBS are a valuable addition to any workshop. The design provides optimal safety for the forklift drivers and co workers during any ‘lift by hook’ function. The compact closed length of the forklift jib allows for greater lifting capability and manoeuvrability while extending up to 2500 mm in length gives extra versatility when required. The tilt angle of the boom increases the jibs capability while a safety chain securely attaches the jib to the fork truck.
Removal of the locking pin allows the jib to be extended giving a choice of four different lifting positions. A safety swivel hook is fitted as standard. They are zinc plated finish for durability and certified to relevant Australian Standards. Supplied complete with an instruction manual, certification and risk assessment.
SPECIFICATIONS:
- Working Load Limit (WLL): 3500, 4700 and 7500 kg
- Unit Weight 115/140/390 kg
- Load Centre 800/790/1275 mm
- Pocket Size 185 x 65/185 x 65/230 x 110 mm
- Pocket Centres 300/350/875 mm
- Horizontal C of G 580/600/680 mm
- Vertical C of G 110/120/105 mm
-
Lifting Beams – Adjustable Crane or Forklift
3rd March, 2017 | by excitemediaOur Spreader Beams can be used by either crane or forklift. They are a unique multi-tasking beam that is perfect for overhead lifting applications. Spreader Beams make light work of extremely heavy loads, lifting them with ease.
The Spreader Beams feature adjustable load suspension points. These hooking points can be moved along and set to three different positions – fully retracted, middle and fully extended. By moving the extendable arms, located at each end of the beam, the span is easily changed. The extendable arms are secured safely with locking pins.
All Spreader Beams are supplied with two safety swivel hooks. The extendable arms are zinc plated and the main body of the beam is painted in a visible ‘safety orange’ enamel. All Spreader Beams are safety certified in accordance with relevant Australian Standards.
Showing results for stainless none name none
