Search Results for: pink reel parte 2

• Dimensioning System iDimension PLUS Mobile

  4th September, 2020 | by John Brittain
  read more

  iDimension Plus Mobile brings dimensioning everywhere you need it, from your loading dock to your warehouse aisle.

  Cut steps and boost throughput: Mobile solutions are proven to cut steps and boost work rate by up to 50%.

  Combine that with Plus Mobile’s intelligent, lightning-fast dimensioning and data scanning and you’ll realize dramatic increases in throughput.

  “Legal for Trade in Australia” certificate of approval NMI 13/1/35

• Concrete Washout Filtration Unit

  10th September, 2020 | by materialshandling
  read more

  Reduce harmful runoff with our Concrete Washout Filtration Unit. This system effectively controls and handles concrete wash water onsite to minimise the risk of pollution and hazardous materials. It allows concrete trucks to wash directly into the filtration bag and contain waste and excess materials.

  With a Filtration Bag made from 300gsm geotextile fabric, this system collects sand, gravel and concrete particles as fine as 80 microns. Excess water drains through the bag and is captured in the holding tank below. From here, the water can be tested and treated, making it a great de-watering station.

  Fitted with fork guides and crane lugs, the Filtration Unit can be easily located around a job site. It’s ideal for concrete slurry from trucks and equipment washout, concrete cutting, coring and grinding. As mentioned, it can be additionally used for pumping and filtering sediment from silt-laden water.

• Trailer Stabilising Jack Stand

  20th August, 2020 | by materialshandling
  read more

  Used in pairs, the Trailer Stabilising Jack Stand provides stability and support during loading and unloading procedures. Placed under the trailer frame on a level and even grounding, they include a screw mechanism for height adjustment. Supporting static capacities of up to 45 tonnes, they assist and improve warehouse efficiencies.

  Such a stand is not intended to be the only source of support for an uncoupled trailer. As such, it provides additional stability to any onboard trailer. Two Jack Stands should be used on either side of the trailer. This is so the trailer can straddle the truck when loading or unloading.

  The Trailer Jack Stand is a great materials handling solution, especially when securing trailers that are ready for transportation. Finished in a high-visibility yellow, they are recognisable and reliable.

• Ramps Aluminium Trolley

  20th August, 2020 | by materialshandling
  read more

  The Aluminium Trolley Ramp is a robust materials handling solution, perfect for medium-duty applications. This device is not recommended for powered equipment or vehicles. Instead, the ramp supports pedestrian or hand trolley use and is load rated up to 300 kg.

  Made from a 6 mm thick aluminium construction, this device features textured flooring for user grip. It easily provides a bridge for kerbs, steps or gutters up to 200 mm. Users can conveniently carry the ramp, thanks to its lightweight design and supportive carry handles.

  This Trolley Ramp is cost-effective and handy. Supplied with two stainless steel locating pins, which help secure it into place, it’s quick and easy to set up and use.

  Need another solution?  View our other Ramps for quick and easy access.

• Ramps Portable Trolley

  19th August, 2020 | by materialshandling
  read more

  These Portable Trolley Ramps assist in moving loads or wheelchairs over kerbs, steps, gutters and raised levels. Simply hook the ramp onto the edge and away you go! As a quick and cost-effective solution, they are made from a strong polyethylene construction.

  Our portable ramps make it easier than ever to navigate multiple levels. Available in two models, the PTR1 is a cost-effective and lightweight solution, whereas the PTR2 is reinforced with a steel backing for heavier loads. Both ramps are lightweight enough to carry and feature convenient handles for easy transfer.

  Additionally, our Portable Trolley Ramps feature textured plastic flooring for extra grip. Both models are rated to support loads of up to 300 kg.

   

• Bollards T-Top

  28th May, 2020 | by materialshandling
  read more

  T-Top Bollards increase pedestrian safety as they zone areas and restrict access. Featuring a tough and durable construction, they provide anchor points for barrier tape and can be quickly assembled where required. The bollards have a two-piece construction (top and base), which allows them to be easily handled and stored.

  Perfect for use in windy or high-speed traffic locations, they are lightweight and easily removable. They assist with various applications like road works, car parking spaces, restricting high-risk areas and crowd/traffic management. They also comply with relevant Australian Standards and have a tough-moulded polyethylene build.

  T-Top Bollards are finished with a high visibility orange colour and reflective bands for use at any time of the day. Additionally, their 6 kg base makes them stable and well-supported.

• Flex Impact Traffic Barrier Mini

  10th April, 2020 | by John Brittain
  read more

  The Flex Impact Traffic Barrier Mini is the smallest and lightest size of traffic barrier impact protection in our series and is specifically designed for use with trolleys, carts and light wheeled objects that have a low impact risk. This barrier consists of a smaller, 125mm diameter, single tube low to the ground. And even though it is very lightweight, it holds well against any small rolling stock. These barriers are also available in our Flex Impact TB Mini Double that are similar in design to our TB Mini but with an additional tube for increased protection. The TB Mini Double is sufficiently strong enough to protect against light wheeled objects such as containers, pallet trucks and trolleys. These are the lightest traffic barriers in our Flex Impact range.The TB Mini is quick and easy to install. View the PDF below for details and dimensions.

• Lifting Cages – Rigging Storage

  9th April, 2020 | by materialshandling
  read more

  The Rigging Storage Cage is a secure storage unit that protects valuable items. Designed especially for rigging equipment, it suitably stores chains, slings, shackles, hooks and clamps. When these items are not in use, they can be hung up and out of the way. This protects them from potential hazards that may compromise the integrity of the lifting equipment.

  Each cage is fully enclosed with a sheet metal roof that ensures the safety of all items. They are fitted with 4-point crane lifting lugs and forklift pockets, which allows them to be transported to and from a worksite. The cage also has a lockable gate for restricted access and to provide extra security against theft.

  The MCNGC10 has a Working Load Limit (WLL) of 750 kg and is supplied with 20 hanging hooks.