Search Results for: 44+gallon+drum+stainless+steel/about:blank
-
Tool Locker Plastic
3rd March, 2017 | by excitemediaEasy, wheel in wheel out facility, used for tool trolleys and roll cabs. These polyethylene lockers have a 316 grade stainless steel shelf frame and six 900 x 300mm galvanised slide out shelves. The doors have three way locking and 300mm high sloping tops for added security.
Size is 1100 x 930 x 2060mm (W x D x H).
The sloping top adds 300mm to the H dimension.
-
Scales Pallet Platform
3rd March, 2017 | by excitemediaAn in-ground or on floor installation is possible with the MELP3000 series low profile scales and they are trade approved. They are very low profile design which allows for loading bulk goods from all four sides.
- Loading ramps can be added if necessary as an optional extra.
- Strong, robust design
- Drop centre model available with platform height above ground reduced to just 50mm.
- Standard finish is galvanised frame and platform.
- Fully Portable.
- Non-standard designs built to specification
- Stainless steel load cells optionally available
- Meets National Standards Commission standards and is certified for trade.
- Electronic corner adjustment can be done even when the scale is in a pit.
- Screw on Platform making the MELP3000 series ideal for pit install.
-
Waste Bins Foot Pedal Clinical Biohazard
3rd March, 2017 | by excitemediaClinical and Biohazard Waste Bins can be used in many situations. They are most frequently used in medical, surgery, laboratory, pathology waste and other hygiene critical areas.
The two sizes are available as standard items or with a hands-free, stainless steel foot pedal operated lid lifting device. They can also be used as a heavy-duty kitchen or washroom bin. The cost savings of separating clinical and general wastes are enormous.
Yellow is generally used for biohazard waste, however, these bins can also be supplied in charcoal or purple.
-
Loading Dock Bumpers
3rd March, 2017 | by excitemediaThe perfect way to protect your truck-loading bays!
Often buildings can suffer repeated impacts when trucks reverse in loading bays. Over time these impacts can cause costly damages.
We have a steel-faced rubber dock bumper designed to protect buildings where bumpers are required under normal conditions.
They provide three roles:
- Absorb the shock when vehicles arrive at dock with thick rubber
- Spread the pressure of the impact over a wider surface with its large steel surface
- Resist wear caused by the friction of the vehicle against the buffer as it moves up and down during loading/unloading.
Moreover, the solidity and size of our bumpers encourage drivers to adopt a lighter approach when reversing in the docks.
-
Pallet Racking Leg Guard Bull-Dog
3rd March, 2017 | by excitemediaPallet racking can sometimes be supporting many tonnes of product. Protecting the frames is of vital importance to avoid potential disasters caused as a result of impact by forklifts or vehicles. Bull-Dog brackets are manufactured from heavy steel plate and bolt to the warehouse floor independent of the racking. This helps by isolating any impact from the structural members of the racking system. When considered against the cost of potential damage, Bull-Dog brackets represent a valuable form of insurance!
Specifications:
Material: Thick steel plate
Finish: Powder coated high visibility safety yellow
Height: Various models
Weight: 4 kgs approx
Installation: 4 x 12mm masonry anchors (included) -
Bike Racks
3rd March, 2017 | by excitemediaOne-piece design Rounded Bike Rack Rails consist of 48mm diameter x 3mm wall, heavy galvanised pipe and are 850 wide x 800mm high. The surface mount rack has a 6mm thick fully welded base flange. The below ground rack has welded starter bars for concrete footing installation.
There are also the Schoolies Racks available that can accommodate 8 bikes of varying sizes for casual bike storage. They are manufactured from mild steel and hot dip galvanised. Designed to be relocatable it can flat pack for easy transportation for various events. It can lock one wheel to the frame, and is only available in a hot dip galvanised finish.
Our Wall Mounted Racks are sturdy one piece, mild steel and hot dip galvanised bike rack, designed to be to accommodate 1 full size bicycle with the ability to lock one wheel and the frame for total security. The bike is suspended on plastic coated prongs to protect the rims from possible damage. Can be used indoors or out. Available in galvanised or galvanised with black powder coating.
-
Ball Transfer Tables
3rd March, 2017 | by excitemediaOur Ball Transfer Tables help move goods in any direction, across a horizontal plane. They are primarily suited for moving steel plates, around guillotines and presses, multi-directional transfers of products between conveyors and handling components in tote boxes around machines.
Standard Ball Transfer Conveyor Decks:
- Mild steel modular construction powder-coated
- 750, 1500 or 3000mm lengths with 35 x 90 x 3mm side channels
- B/B widths 317, 417, 517, 617 or 817mm
- CWC02 push in ball transfer with 75mm pitch centre to centre
These products are custom made to order. See 3 examples below in Product Variations. Please ask our facilitators for a proposal.
View our range of individual ball transfer units.
-
Stretch Wrapping Trolley
13th March, 2026 | by Matthew BrittainThis Mobile Stretch Wrapper is an ergonomic, safe, efficient, economical and easy way to wrap pallets.
No bending or twisting is required. Just wheel the mechanically-assisted wrapper to the pallet, attach the film and get moving.
The Mobile Stretch Wrapper takes only seconds to change a film roll.
This device makes pallet and stretch wrapping simple and quick to do!
*Actual colour of machine may vary at time of purchase
