For absolutely safe handling & installation of horizontal and ceiling panels and doors.
With a hydraulically controlled angular head, it can be used to transport large doors down narrow passages and applied for awkward corner fitting.
With the application of the OKTOPUS® ITB on industrial building sites (e.g. cool rooms, factory buildings, large warehouses etc.) or even in the prefabrication of wall panels or doors the following distinct advantages are provided:
• Increased-working safety
• Lower costs for loading, unloading and installation of cold storage doors and wall panels due to simplified handling and rationalization of the work method
• Lower staff requirement with smaller installation teams
• Relieving of the workers from heavy lifting tasks
• Saving of additional devices
• Protection of the panels during transport and installation
• Exchangeable suctions heads for almost all current profiled surfaces
• Safety and security is ensured via a key lockable switch
Technical data:
• Power supply: 24v on board rechargeable battery system. Charger not integrated
• Lifting capacity: max. 400kg
• Nett weight: approx. 500kg
• Control: Cable remote
• Dual safety system - 2 independent vacuum circuits
• Each vacuum circuit has a safety factor of 2 and integrated vacuum reservoir
• Two integrated vacuum meters (1 per circuit) and one charge meter
• Visual and acoustic warning facilities signals deviation of the set condition
• Suction bridge can be moved 60° (+ or - 30°) on the vertical axis & 180° (+ or - 90°) on the horizontal axis via the integrated hydraulics.
The OKTOPUS® may only be operated in conjunction with a type tested (AS) forklift with a sufficient lifting capacity (see operating manual). It conforms to AS4992 - 2004 section 5 and fulfils the European DIN EN 13155 standard.
Send an Enquiry to Us
