General Duty - lighter industrial use, displays, bakeries ‘D’ Series

 

The D series is designed to give the lowest cost reliable design for use up to 100kg each (400kg over 4). Two complete rows of balls give a very free running castor for low speed use. A bright zinc and lacquer protective
finish. The D series is the ideal solution for all the light industrial uses which do not justify the expense of a stronger castor. However, as this is the entry point for industrial specifications, please consider all the conditions of use carefully. The barrelling of the fork gives it more impact strength than the 'M' fork, but for heavier use see our 'J' and 'H' series. The D series castor has many uses throughout the light industrial and commercial sector. Uses may include display cabinets, drill presses, light engine stands, large toolboxes, warehouse trolleys, work benches, refrigerators, under bench trolleys, etc. For its size, the castor is designed with a host of features including substantial barrelling, large twin races, various mounting options, a number of wheel types and a bright zinc plated and lacquer finish. A good all round performer.

Choosing the right castor
• firstly select the wheel code, eg ADNN100
• where not standard*, add threadguards, eg ADNN100G (if required)
• then the castor frame from one of the next four columns, eg ADNN100G/DZP
• add a brake if required, select TB from the final column, eg ADNN100G/DZPTB (not available on fixed)